Job Flow Service Settings - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

Job Flow Service Settings

In [Job Flow Service Settings], you can configure the settings related to the Job Flow. The
Job Flow is a function to perform a series of jobs registered.
Also, in [Job Flow Service Settings], you can configure a pool server. As for [Pool Server], [Pool
Server Login Method], and [Job Flow Sheet List Default], however, leave the default settings
unchanged because a pool server is not available for the machine.
You can select a resolution in [Fax Transfer Resolution] when you transfer a scanned
document as a fax.
Pool Server
Leave the default setting unchanged.
Pool Server Login Method
Leave the default setting unchanged.
Job Flow Sheet List Default
Set the default values for [Save in], [Owner], and [Target] of Job flow sheets which are
displayed when you select [Job Flow Sheets] on the Services Home screen.
Save in
Leave the default setting unchanged.
Owner
Select the owner of job flow sheets from administrator and non-system administrator to
filter.
Note • When the machine is in the Authentication mode, select the owner from Shared or Personal.
Target
Select the target of job flow sheets from Scan Jobs, External Application, and Copy to filter.
Fax Transfer Resolution
Select the resolution setting when you send a color document as a fax using the Job Flow
feature.
Same Resolution (High Quality)
Converts color images to black and white images on a document with the same resolution
when the document is transferred as a fax. Conversion of high resolution color images will
take longer.
200 dpi (High Speed)
Converts color images to black and white images of 200 dpi on a document when the
document is transferred as a fax.
Reduces the time when converting color images of 300 dpi or higher to black and white
images. 200 dpi is equivalent to [Fine] in fax transmission.

Job Flow Service Settings

225
5