Paper Tray Attributes During Loading; Customize Paper Supply Screen - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

When you load non-standard size paper in a tray, select [Custom Size], and specify the width
and length. When you load standard size paper in a tray, select [Auto Detect].
Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine cannot
Paper Type
Select the type of paper to load in the trays.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight" (P.38).
Paper Size
When the One Tray Module (optional) is installed, you can load both standard size paper
and non-standard size paper for Trays 1 and 2. When you load non-standard size paper,
select [Custom Size], and then set the size in the X (width) direction and in the Y (length)
direction. Set the size in X (width) direction between 148 and 215 mm and the Y (length)
direction between 210 and 355 mm in 1 mm increments.
Select [Auto Detect] to use the standard size paper.
For more information, refer to "Supported Paper" (P.40).
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.

Customize Paper Supply Screen

Select whether or not the setting items specified in [Paper Size] or [Auto Paper Select] under
[Paper Tray Attributes] are to be displayed on the [Paper Supply] screen.
Disabled
Does not display the items specified in [Paper Size].
Size Detection
Displays the setting in [Paper Size].
Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen.
This setting allows you to select the size and type of paper without entering the System
Administration mode.

Paper Tray Attributes During Loading

Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Tray 1 and Tray 2 (optional). You cannot apply this setting to Tray 5.
detect a tray, use Tray 5.
Common Service Settings
137
5