Power Saver Mode; Changing The Interval For Entering Power Saver Mode - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

Power Saver Mode

The machine is equipped with the Power Saver mode that reduces the power consumption
by saving the electricity to the machine when no copy or print data is received for a specified
time.
The Power Saver has two modes: the Low Power mode and the Sleep mode.
When you do not use the machine for a specified period of time, the machine enters the Low
Power mode.
When it reaches the specified time in the Low Power mode, the machine then enters the
Sleep mode.

Changing the Interval for Entering Power Saver Mode

You can set the time to elapse until the machine enters the Low Power mode and the Sleep
Mode from 1 to 30 minutes and from 1 to 60 minutes respectively in 1 minute increments.
Note • If the preset time period is the same for the Low Power mode and the Sleep mode, the machine
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
directly enters the Sleep mode without entering the Low Power mode first.
displayed on the touch screen, press the
<Services Home> button.

Power Saver Mode

Job Machine
ABC DEF Log In / Out Status Status
2 3
Dial
Pause
JKL MNO
Clear All
5 6
Interrupt Stop
Speed
TUV WXYZ Dial
Start
8 9
0 ＃ C
Power Data Error
<Log In/Out> button
1
Power
Saver
21