Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 31 Static DHCP: Static DHCP Configuration/Edit
LABEL
Active
Group Name
IP Type
Select Device Info
MAC Address
IP Address
OK
Cancel
8.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See
page 118
Use the following screen to configure the UPnP settings on your VMG. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 53 Network Setting > Home Networking > UPnP
Chapter 8 Home Networking
DESCRIPTION
Select this to activate the connection between the client and the VMG.
Select the interface group name for which you want to configure static DHCP settings.
See
Chapter 14 on page 177
This field displays IPv4 for the type of the DHCP IP address. At the time of writing, it is
not allowed to select other type.
Select a device or computer from the drop-down list or select Manual Input to manually
enter a device's MAC address and IP address in the following fields.
If you select Manual Input, enter the MAC address of a computer on your LAN.
If you select Manual Input, enter the IP address that you want to assign to the
computer on your LAN with the MAC address that you will also specify.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
VMG1312-Bx0D User's Guide
for how to create a new interface group.
124
Advertisement
Table of Contents
