Table of Contents
Advertisement
Table 58 Port Triggering: Configuration Add/Edit (continued)
LABEL
Open Start Port
Open End Port
Open Protocol
OK
Cancel
11.5 The DMZ Screen
In addition to the servers for specified services, NAT supports a default server IP address. A default
server receives packets from ports that are not specified in the NAT Port Forwarding Setup
screen.
Figure 82 Network Setting > NAT > DMZ
The following table describes the fields in this screen.
Table 59 Network Setting > NAT > DMZ
LABEL
Default Server
Address
Apply
Cancel
11.6 The ALG Screen
Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG allows SIP calls
to pass through NAT by examining and translating IP addresses embedded in the data stream.
When the VMG registers with the SIP register server, the SIP ALG translates the VMG's private IP
address inside the SIP data stream to a public IP address. You do not need to use STUN or an
outbound proxy if your VMG is behind a SIP ALG.
Use this screen to enable and disable the NAT and SIP (VoIP) ALG in the VMG. To access this
screen, click Network Setting > NAT > ALG.
Chapter 11 Network Address Translation (NAT)
DESCRIPTION
The open port is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The VMG forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Select the transport layer protocol from TCP or UDP.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter the IP address of the default server which receives packets from ports that are not
specified in the NAT Port Forwarding screen.
Note: If you do not assign a Default Server Address, the VMG discards all packets received
for ports that are not specified in the NAT Port Forwarding screen.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG1312-Bx0D User's Guide
163
Advertisement
Table of Contents
