Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 24 Network Setting > Wireless > WDS
LABEL
2.4GHz Wireless Bridge Setup
AP Mode
Bridge Restrict
Remote Bridge
MAC Address
#
MAC Address
Modify
Scan
Apply
Cancel
7.6.1 WDS Scan
You can click the Scan icon in Wireless > WDS to have the VMG automatically search and display
the available APs within range. Select an AP and click Apply to have the VMG establish a wireless
link with the selected wireless device.
Figure 39 WDS: Scan
Chapter 7 Wireless
DESCRIPTION
Select the operating mode for your VMG.
•
Access Point - The VMG functions as a bridge and access point simultaneously.
•
Wireless Bridge - The VMG acts as a wireless network bridge and establishes wireless
links with other APs. In this mode, clients cannot connect to the VMG wirelessly.
This field is available only when you set operating mode to Access Point.
Select Enabled to turn on WDS and enter the peer device's MAC address manually in the
table below. Select Disable to turn off WDS.
You can enter the MAC address of the peer device by clicking the Edit icon under Modify.
This is the index number of the entry.
This shows the MAC address of the peer device.
You can connect to up to 4 peer devices.
Click the Edit icon and type the MAC address of the peer device in a valid MAC address
format (six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to remove this entry.
Click the Scan icon to search and display the available APs within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG1312-Bx0D User's Guide
99
Advertisement
Table of Contents
