Table of Contents
Advertisement
Table 26 Network Setting > Wireless > Others (continued)
LABEL
WPS 2.0
Apply
Cancel
7.8 The Channel Status Screen
Use the Channel Status screen to scan wireless LAN channel noises and view the results. Click
Network Setting > Wireless > Channel Status. The screen appears as shown. Click Scan to
scan the wireless LAN channels. You can view the results in the Channel Scan Result section.
Note: The Scan button only works when the VMG uses 20MHz for the wireless channel
width. You can go to the
more link, and then change the channel width setting in the Bandwidth field.
Figure 41 Network Setting > Wireless > Channel Status
Chapter 7 Wireless
DESCRIPTION
Select Enable to support WPS 2.0 which enhances WPS security and flexibility on
configuration. Select Disabled to disable this feature.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Network Setting > Wireless >
VMG1312-Bx0D User's Guide
102
General screen, click the
Advertisement
Table of Contents
