Table of Contents
Advertisement
Figure 4 LEDs on the VMG
None of the LEDs are on if the VMG is not receiving power.
Table 1 LED Descriptions
LED
Power
DSL
Internet
Ethernet1~
4
WLAN/WPS
USB
1.6 The RESET Button
If you forget your password or cannot access the Web Configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to "1234".
Make sure the PWR/SYS LED is on (not blinking).
1
Chapter 1 Introducing the VMG
COLOR
STATUS
DESCRIPTION
Green
On
The VMG is receiving power and ready for use.
Blinking
The VMG is self-testing.
Red
On
The VMG detected an error while self-testing, or there is a device
malfunction.
Off
The VMG is not receiving power.
Green
On
The DSL line is up.
Blinking
The VMG is initializing the DSL line.
Off
The DSL line is down.
Green
On
The VMG has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking
The VMG is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged mode.
Red
On
The VMG attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Green
On
The VMG has a successful 1000 Mbps Ethernet connection with a device
on the Local Area Network (LAN).
Blinking
The VMG is sending or receiving data to/from the LAN at 1000 Mbps.
Off
The VMG does not have an Ethernet connection with the LAN.
Green
On
The wireless network is activated.
Blinking
The VMG is communicating with wireless clients.
Orange
Blinking
The VMG is setting up a WPS connection with a wireless client.
Off
The wireless network is not activated.
Green
On
The VMG recognizes a USB connection through the USB slot.
Blinking
The VMG is sending/receiving data to/from the USB device connected to
it.
Off
The VMG does not detect a USB connection through the USB slot.
VMG1312-Bx0D User's Guide
20
Advertisement
Table of Contents
