Table of Contents
Advertisement
Figure 98 Interface Group Configuration
The following table describes the fields in this screen.
Table 72 Interface Group Configuration
LABEL
DESCRIPTION
Group Name
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
WAN Interface
Select the WAN interface this group uses. The group can have up to one PTM interface and
used in the
up to one ATM interface.
grouping
Grouped LAN
Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the Available
Interfaces
LAN Interfaces list and use the left arrow to move them to the Grouped LAN Interfaces
list to add the interfaces to this group.
Available LAN
Interfaces
To remove a LAN or wireless LAN interface from the Grouped LAN Interfaces, use the
right-facing arrow.
Automatically
Click Add to identify LAN hosts to add to the interface group by criteria such as the type of
Add Clients
the hardware or firmware. See
With the
following DHCP
Vendor IDs
#
This shows the index number of the rule.
Filter Criteria
This shows the filtering criteria. The LAN interface on which the matched traffic is received
will belong to this group automatically.
WildCard
This shows if wildcard on DHCP option 60 is enabled.
Support
Remove
Click the Remove icon to delete this rule from the VMG.
OK
Click OK to save your changes.
Cancel
Click Cancel to exit this screen without saving.
Chapter 14 Interface Group
Section 14.2.2 on page 180
VMG1312-Bx0D User's Guide
179
for more information.
Advertisement
Table of Contents
