The Applications Screen; Add New Application - ZyXEL Communications VMG1312-BX0D User Manual

Table 54 Port Forwarding: Add/Edit (continued)
LABEL
Server IP
Address
Protocol
OK
Cancel

11.3 The Applications Screen

This screen provides a summary of all NAT applications and their configuration. In addition, this
screen allows you to create new applications and/or remove existing ones.
To access this screen, click Network Setting > NAT > Applications. The following screen
appears.
Figure 77 Network Setting > NAT > Applications
The following table describes the labels in this screen.
Table 55 Network Setting > NAT > Applications
LABEL
Add New
Application
Application
Forwarded
WAN Interface
Server IP
Address
Modify

11.3.1 Add New Application

This screen lets you create new NAT application rules. Click Add New Application in the
Applications screen to open the following screen.
Chapter 11 Network Address Translation (NAT)
DESCRIPTION
Enter the inside IP address of the virtual server here.
Select the protocol supported by this virtual server. Choices are TCP, UDP, or TCP/UDP.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Click this to add a new NAT application rule.
This field shows the type of application that the service forwards.
This field shows the WAN interface through which the service is forwarded.
This field displays the destination IP address for the service.
Click the Delete icon to delete the rule.
VMG1312-Bx0D User's Guide
159