ZyXEL Communications VMG1312-BX0D User Manual page 29

Table 3 Navigation Panel Summary (continued)
LINK TAB
Traffic Status WAN
LAN
NAT
ARP table
Routing Table
Multicast IGMP Status
Status
MLD Status
xDSL Statistics
3G Statistics
Maintenance
System
User Account User Account
Remote MGMT MGMT Services
Trust Domain
TR-069 Client
SNMP
Time
Email
Notification
Log Setting
Firmware
Upgrade
Backup Restore Backup/Restore
ROM-D
Reboot
Diagnostic Ping&Traceroute
&Nslookup
802.1ag
OAM Ping
Chapter 2 The Web Configurator
FUNCTION
Use this screen to view the status of all network traffic going through
the WAN port of the VMG.
Use this screen to view the status of all network traffic going through
the LAN ports of the VMG.
Use this screen to view NAT statistics for connected hosts.
Use this screen to view the ARP table. It displays the IP and MAC
address of each DHCP connection.
Use this screen to view the routing table on the VMG.
Use this screen to view the status of all IGMP settings on the VMG.
Use this screen to view the status of all MLD settings on the VMG.
Use this screen to view the VMG's xDSL traffic statistics.
Use this screen to look at 3G Internet connection status.
Use this screen to set Device name and Domain name.
Use this screen to change user password on the VMG.
Use this screen to enable specific traffic directions for network
services.
Use this screen to configure a list of public IP addresses which are
allowed to access the VMG.
Use this screen to configure the VMG to be managed by an Auto
Configuration Server (ACS).
Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Use this screen to change your VMG's time and date.
Use this screen to configure up to two mail servers and sender
addresses on the VMG.
Use this screen to change your VMG's log settings.
Use this screen to upload firmware to your VMG.
Use this screen to backup and restore your VMG's configuration
(settings) or reset the factory default settings.
Use this screen to save and/or clean the configuration to/from the
ROM-D file which can store customized default settings.
Use this screen to reboot the VMG without turning the power off.
Use this screen to identify problems with the DSL connection. You can
use Ping, TraceRoute, or Nslookup to help you identify problems.
Use this screen to configure CFM (Connectivity Fault Management)
MD (maintenance domain) and MA (maintenance association),
perform connectivity tests and view test reports.
Use this screen to view information to help you identify problems with
the DSL connection.
VMG1312-Bx0D User's Guide
29