NETGEAR SRX5308 Reference Manual page 48

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 26.
3. Enter the settings as explained in the following table:
Table 9. Add QoS screen settings for a rate control profile
Setting
QoS Type
Interface
Service
Direction
Diffserv QoS Match
Description
Rate Control (for Priority, see
From the drop-down list, select one of the WAN interfaces.
From the drop-down list, select a service or application to be covered by this
profile. If the service or application does not appear in the list, you need to
define it using the Services screen (see
From the drop-down list, select the direction to which rate control is applied:
• Outbound Traffic. Rate control is applied to outbound traffic only.
• Inbound Traffic. Rate control is applied to inbound traffic only.
Enter a DSCP value in the range of 0 through 63. Packets are classified
against this value. Leave this field blank to disable packet matching.
Connecting the VPN Firewall to the Internet
48
Figure 27 on page 50 and Table 10
Services-Based Rules
on page 50).
on page 84).