NETGEAR SRX5308 Reference Manual page 216

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 54. Add SSL VPN Policy screen settings (continued)
Setting Description
Add SSL VPN Policies
Apply Select one of the following radio buttons to specify how the policy is applied:
Policy For
• Network Resource. The policy is applied to a network resource that you have defined on
the Resources screen (see
page 210). The screen adjusts to display the fields that are shown in the Network Resource
rows.
• IP Address. The policy is applied to a single IP address. The screen adjusts to display the
fields that are shown in the IP Address rows of this table.
• IP Network. The policy is applied to a network address. The screen adjusts to display the
fields that are shown in the IP Network rows of this table.
• All Addresses. The policy is applied to all addresses. The screen adjusts to display the
fields that are shown in the All Addresses rows of this table.
Network
Resource
IP Address
Virtual Private Networking Using SSL Connections
Use Network Resource Objects to Simplify Policies
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Defined From the drop-down list, select a network resource that you
Resources have defined on the Resources screen (see
Resource Objects to Simplify Policies
Permission From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
IP Address The IP address to which the SSL VPN policy is applied.
Port Range / A port (fill in the Begin field) or a range of ports (fill in the Begin
Port Number and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank
to apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
216
on
Use Network
on page 210).