NETGEAR SRX5308 Reference Manual page 128

Note: For additional ways of restricting outbound traffic, see
Rules (Service Blocking)

To enable MAC filtering and add MAC addresses to be permitted or blocked:
1. Select Security > Address Filter. The Address Filter submenu tabs display, with the
Source MAC Filter screen in view. (The following figure shows one address in the MAC
Addresses table as an example.)
Figure 69.
2. In the MAC Filtering Enable section, select the Yes radio button.
3. In the same section, below the radio buttons, select one of the following options from the
drop-down list:
• Block. Traffic coming from all addresses in the MAC Addresses table is blocked.
• Permit. Traffic coming from all addresses in the MAC Addresses table is permitted.
4. Below Add Source MAC Address, build your list of source MAC addresses to be permitted
or blocked by entering the first MAC address in the MAC Address field. A MAC address
needs to be entered in the format xx:xx:xx:xx:xx:xx, in which x is a numeric (0 to 9) or a letter
between a and f (inclusive), for example: aa:11:bb:22:cc:03.
5. Click the Add table button. The MAC address is added to the MAC Addresses table.
6. Click Apply to save your settings.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
on page 84.
Firewall Protection
128
Outbound