NETGEAR SRX5308 Reference Manual page 70

Add Computers or Devices to the Network Database

To add computers or devices manually to the network database:
1. In the Add Known PCs and Devices section of the LAN Groups screen (see
on page 69), enter the settings as explained in the following table:
Table 13. Known PCs and devices settings
Setting
Name
IP Address Type
IP Address
MAC Address
Group
Profile Name
2. Click the Add table button to add the computer or device to the Known PCs and Devices
table.
3. As an optional step: To enable DHCP address reservation for the entry that you just added
to the Known PCs and Devices table, select the check box for the table entry and click Save
Binding to bind the IP address to the MAC address for DHCP assignment.
Edit Computers or Devices in the Network Database

To edit computers or devices manually in the network database:
1. In the Known PCs and Devices table of the LAN Groups screen (see
page 69), click the Edit table button of a table entry. The Edit Groups and Hosts screen
displays:
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
Enter the name of the computer or device.
From the drop-down list, select how the computer or device receives it IP address:
• Fixed (set on PC). The IP address is statically assigned on the computer or
device.
• Reserved (DHCP Client). Directs the VPN firewall's DHCP server to always
assign the specified IP address to this client during the DHCP negotiation (see
Set Up Address Reservation
Note: When a reserved IP address is assigned to a client, the IP address selected
needs to be outside the range of addresses allocated to the DHCP server pool.
Enter the IP address that this computer or device is assigned in the IP Address
field. If the IP address type is Reserved (DHCP Client), the VPN firewall reserves
the IP address for the associated MAC address.
Enter the MAC address of the computer or device's network interface. The MAC
address format is six colon-separated pairs of hexadecimal characters (0–9 and
a–f), such as 01:23:45:67:89:ab.
From the drop-down list, select the group to which the computer or device is
assigned. (Group 1 is the default group.)
From the drop-down list, select the VLAN profile to which the computer or device is
assigned. (defaultVlan is the default VLAN group.)
LAN Configuration
on page 72).
70
Figure 34
Figure 34 on