NETGEAR SRX5308 Reference Manual page 121

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 66.
3. Enter the settings as explained in the following table:
Table 24. Add Bandwidth Profile screen settings
Setting Description
Profile Name A descriptive name of the bandwidth profile for identification and management purposes.
Direction From the Direction drop-down list, select the direction in which the bandwidth profile is
applied:
• Outbound Traffic. The bandwidth profile is applied only to outbound traffic. Specify the
outbound minimum and maximum bandwidths.
• Inbound Traffic. The bandwidth profile is applied only to inbound traffic. Specify the
inbound minimum and maximum bandwidths.
• Both. The bandwidth profile is applied both to outbound and inbound traffic. Specify both
the outbound and inbound minimum and maximum bandwidths.
Outbound Minimum
Bandwidth
Outbound Maximum
Bandwidth
Inbound Minimum
Bandwidth
Inbound Maximum
Bandwidth
The outbound minimum allocated bandwidth in Kbps. The default
setting is 0 Kbps.
The outbound maximum allowed bandwidth in Kbps. The default
setting is 100 Kbps (you cannot configure less than 100 Kbps); the
maximum allowable bandwidth is 100000 Kbps.
The inbound minimum allocated bandwidth in Kbps. The default
setting is 0 Kbps.
The inbound maximum allowed bandwidth in Kbps. The default
setting is 100 Kbps (you cannot configure less than 100 Kbps); the
maximum allowable bandwidth is 100000 Kbps.
Firewall Protection
121