NETGEAR SRX5308 Reference Manual page 233

6. In the Add Defined Addresses section of the screen, add an address to the Defined
Addresses table by entering the settings as explained in the following table:
Table 59. Defined addresses settings
Setting
Source Address Type Select the type of address from the drop-down list:
Network Address / IP
Address
Mask Length
7. Click the Add table button. The address is added to the Defined Addresses table.
8. Repeat step 6 and
Addresses table.

To delete one or more addresses:
1. In the Defined Addresses table, select the check box to the left of the address that you
want to delete, or click the Select All table button to select all addresses.
2. Click the Delete table button.
Configure Login Restrictions Based on Web Browser

To restrict logging in based on the user's browser:
1. Select Users > Users. The Users screen displays (see
2. In the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The Policies submenu tabs display, with the Login
Policies screen in view.
3. Click the by Client Browser submenu tab. The By Client Browser screen displays. (The
following figure shows a browser in the Defined Browsers table as an example.)
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
• IP Address. A single IP address.
• IP Network. A subnet of IP addresses. You need to enter a netmask length in
the Mask Length field.
Depending on your selection of the Source Address Type drop-down list, enter the
IP address or the network address.
For a network address, enter the netmask length (0–32).
Note: By default, a single IP address is assigned a netmask length of 32.
step 7 for any other addresses that you want to add to the Defined
Managing Users, Authentication, and Certificates
Figure 140
233
on page 229).