NETGEAR SRX5308 Reference Manual page 146

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 85.
2. Select the A router or a VPN gateway radio button, and click Next. The VPN tunnel
parameters wizard screen (screen 2 of 3) displays.
Figure 86.
3. Specify the following VPN tunnel parameters:
• IP or DNS public (external) address of the remote equipment. Enter the remote IP
address or DNS name of the VPN firewall. For example, enter 10.34.116.22.
• Preshared key. Enter the pre-shared key that you already specified on the VPN
firewall. For example, enter I7!KL39dFG_8.
• IP private (internal) address of the remote network. Enter the remote private IP
address of the VPN firewall. For example, enter 192.168.1.0. This IP address enables
communication with the entire 192.168.1.x subnet.
Virtual Private Networking Using IPSec Connections
146