Manage Ipv4 Multihome Lan Ip Addresses On The Default Vlan; Ipv4 Multihome Lan Ip Addresses - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display, with the LAN Setup screen in view, displaying the IPv4
settings.
7. Click the Advanced option arrow in the upper right.
The IPv4 LAN Advanced screen displays.
8. Clear the Enable ARP Broadcast check box.
9. Click the Apply button.
Your settings are saved. The broadcast of ARP packets for the default VLAN is disabled.
Manage IPv4 Multihome LAN IP Addresses on the Default
VLAN
The following sections provide information about managing IPv4 multihome LAN IP
addresses on the default VLAN:
•

IPv4 Multihome LAN IP Addresses

• Add a Secondary LAN IPv4 Address
• Change a Secondary LAN IPv4 Address
• Remove One or More Secondary LAN IPv4 Addresses
IPv4 Multihome LAN IP Addresses
If computers use different IPv4 networks in the LAN (for example, 172.124.10.0 and
192.168.200.0), you can add aliases to the LAN ports and give computers on those networks
Configure the IPv4 LAN Settings
129