NETGEAR SRX5308 Reference Manual page 29

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
In the ISP Login section, select one of the following options:
• If your ISP requires an initial login to establish an Internet connection, select Yes.
(The default is No.)
• If a login is not required, select No and ignore the Login and Password fields.
4. If you selected Yes, enter the login name in the Login field and the password in the
Password field. This information is provided by your ISP.
5. In the ISP Type section of the screen, select the type of ISP connection that you use from
the three listed options. By default, Other (PPPoE) is selected, as shown in the following
figure:
Figure 14.
6. If your connection is PPTP or PPPoE, your ISP requires an initial login. Enter the settings as
explained in the following table:
Table 3. PPTP and PPPoE settings
Setting Description
Austria (PPTP) If your ISP is Austria Telecom or any other ISP that uses PPTP for login, select this radio
button and enter the following settings:
Account Name
Domain Name
Idle Timeout
My IP Address
The account name is also known as the host name or system name.
Enter the valid account name for the PPTP connection (usually your
email ID assigned by your ISP). Some ISPs require you to enter your
full email address here.
Your domain name or workgroup name assigned by your ISP, or your
ISP's domain name. You can leave this field blank.
Select the Keep Connected radio button to keep the connection
always on. To log out after the connection is idle for a period of time,
select the Idle Timeout radio button and, in the timeout field, enter the
number of minutes to wait before disconnecting. This is useful if your
ISP charges you based on the period that you have logged in.
The IP address assigned by the ISP to make the connection with the
ISP server.
Connecting the VPN Firewall to the Internet
29