Connecting The Srx5800 Services Gateway; Tools And Parts Required For Srx5800 Services Gateway Connections; Connecting The Srx5800 Services Gateway To Management And Alarm; Devices - Juniper SRX5800 Hardware Manual

CHAPTER 8
Connecting the SRX5800 Services
Gateway

Tools and Parts Required for SRX5800 Services Gateway Connections

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Tools and Parts Required for SRX5800 Services Gateway Connections on page 87

Connecting the SRX5800 Services Gateway to Management and Alarm

Devices on page 88
Connecting Network Cables to SRX5800 Services Gateway IOCs and Port
Modules on page 91
To connect the device to management devices and IOCs, you need the following tools
and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (-) screwdriver
2.5 mm Phillips (+) screwdriver
Electrostatic discharge (ESD) grounding wrist strap
Overview of Installing the SRX5800 Services Gateway on page 47
Connecting the SRX5800 Services Gateway to a Network for Out-of-Band Management
on page 88
Connecting the SRX5800 Services Gateway to a Management Console or an Auxiliary
Device on page 89
Connecting an SRX5800 Services Gateway to an External Alarm-Reporting Device on
page 90
Connecting Network Cables to SRX5800 Services Gateway IOCs and Port Modules
on page 91
87