Srx5800 Services Gateway Midplane Description - Juniper SRX5800 Hardware Manual

SRX5800 Services Gateway Hardware Guide
Table 4: SRX5800 Services Gateway Card Cage Slots (continued)
Card Cage Slot
10
11 (rightmost)
Related
Documentation

SRX5800 Services Gateway Midplane Description

12
Eligible Cards
SPC
X
X
SRX5800 Services Gateway Midplane Description on page 12
The midplane is located toward the rear of the chassis and forms the rear of the card
cage (see Figure 4 on page
front of the chassis, and the power supplies install into the midplane from the rear of the
chassis. The cooling system components also connect to the midplane.
The midplane performs the following major functions:
Data path—Data packets are transferred across the midplane between the IOCs and
SPCs through the fabric ASICs on the SCBs.
Power distribution—The power supplies are connected to the midplane, which
distributes power to all the services gateway components.
Signal path—The midplane provides the signal path to the IOCs, SCBs, SPCs, Routing
Engine, and other system components for monitoring and control of the system.
IOC, Flex IOC, or MPC
X
X
13). IOCs, SPCs, and SCBs install into the midplane from the
SCB
Copyright © 2014, Juniper Networks, Inc.