Turning Off; Adjusting The Volume On The Tv Monitor - Sony IPELA PCS-XG100 Operating Instructions Manual

To release the standby mode
Press any button on the Remote Commander.
To specify the standby time
Specify the time that you want the system to remain on before entering into
standby mode (1 to 99 minutes) by setting "Standby Time" of the Device Setup
page of the General setup menu. If you do not want the system to enter the
standby mode, set "Standby Mode" to "Off".
For the settings, see "Standby Time" and "Standby Mode" in the General
setup menu on page 87.

Turning Off

1
Press the
The message "Power off?" appears on the monitor screen.
2
Press the V, v, B or b button on the Remote Commander to select "Power
off", and press the ENTER button.
You can power off the system by pressing the
Remote Commander.
The system turns off.
3
Turn off the power of other equipment used for the communication.
Notes
• Turn off the power switch on the Communication System when the system will not
be used for an extended period. While the power switch is off, you cannot receive a
call from a remote party.
• Be sure to unplug the power cord after the power of the system is turned off
completely.
• If the system is unplugged for about 10 days or longer, the clock setting of the system
may be reset. In this case, re-set the date and time in the Clock Set page of the General
setup menu.

Adjusting the Volume on the TV Monitor

The procedure for volume adjustment during system setup differs from the
procedure during communication.
Adjust the volume on the TV monitor during system setup, and adjust the
volume on the Communication System while in communication.
Volume adjustment during setup
Before adjusting the volume on the TV monitor, set the volume on the
Communication System to the appropriate position.
44
Turning the System On/Off
1 (power) switch on the Communication System.
@ / 1 (power) button on the