Chapter 3: Basic Connection; Starting A Connection By Calling A Remote Party; Turning On The Power - Sony IPELA PCS-XG100 Operating Instructions Manual

Chapter 3: Basic
Connection
This chapter describes how to connect to a remote party after the administrator
has completed various registrations and settings for the system.
The chapter explains a point-to-point communication via a LAN connection,
ISDN connection using the optional PCSA-B384S or PCSA-B768S ISDN
Unit or SIP.
Note
ISDN is supported in version 1.41 and later.
For use of optional equipment, see Chapter 4.
To conduct an encrypted communication, see Chapter 5.
To conduct a multipoint communication, see Chapter 6.
Starting a Connection by Calling a
Remote Party
You can start a communication with a remote party by dialing. Once you have
made a connection to the remote party, you can begin talking just as with a
normal phone call and start communication.
You can call a remote party using the various methods described below. Use
any one depending on the settings in the Home menu or connecting status.
• To call a remote party by using the Connect menu (page 117)
• To call a remote party by entering their address or number directly (Direct
Dial) (page 118)
• To call a remote party by using the one-touch dial buttons (page 120)
• To call a remote party by using the history list (page 121)
• To call a remote party registered in the Phone Book (page 122)
• To call a remote party not registered in the Phone Book by setting the
necessary items in the Detailed Dial menu (page 124)

Turning On the Power

1
Turn on the TV monitor.
2
Turn on other equipment you are using for the communication.
3
Press the
116

Starting a Connection by Calling a Remote Party

1 (power) switch on the Communication System to turn it on.