Using The Display Control; Broadcast Mode - Sony IPELA PCS-XG100 Operating Instructions Manual

Using the Display Control

During a multipoint connection you can control the following operations.

Broadcast Mode

There are four broadcast modes, "Split" and "Voice Activate", and "Split
(fixed)" and the broadcast select mode.
You can set up "Split" and "Voice Activate" modes in "Broadcast Mode" of
the Multipoint setup menu.
You can select "Split (fixed)" and broadcast select modes in the Layout menu
during communication.
Split mode
This mode allows display of the pictures of the connected remote terminals and
the picture of the local terminal by splitting the monitor screen.
In "Split" of the Multipoint setup menu, you can select "Six-screen Mosaic" or
"Nine-screen Mosaic" to split the display into six or nine parts regardless of
the number of terminals. If you select "Automatic", the display automatically
splits into three parts when there are two terminals connected, four parts when
there are three, six parts when there are four or five, or nine parts when there
are six to eight terminals connected.
The split windows A to H display the pictures of the remote terminals in the
connected sequence.
207
Using the Display Control