Using The Annotation Function; Connecting A Pen Tablet - Sony IPELA PCS-XG100 Operating Instructions Manual

Using the Annotation Function

During communication you can transmit or receive letters and graphics written
on the screen with a pen tablet as they are written. You can also point the
camera picture or computer picture with a pointer. This function is called
"Annotation".
The annotation function supports the Bamboo small CTH-470/K0
from Wacom Co., Ltd. Version 1.2 and later also supports the Intuos pen small
CTL-480/S0 and Intuos pen & touch small CTH-480/S0 from Wacom Co.,
Ltd.
* Wacom, the Wacom logo and Intuos are registered trademarks of Wacom Co., Ltd.
Bamboo is a trademark.
For details on the Bamboo small CTH-470/K0, Intuos pen small CTL-480/S0,
and Intuos pen & touch small CTH-480/S0, consult with a Sony dealer.
Notes
• The communication using a pen tablet is only available for communication between
the PCS-XG80/XG80S/XG55/XG55S/XA80/XA55/XL55/G60/G60D/G60DP/
XG100/XG77/XG100S/XG77S Communication Systems. A pen tablet cannot be
used for communication with other Sony communication systems.
• Graphics written using the annotation function will not appear in recorded or
streamed video.

Connecting a Pen Tablet

1
Turn off the Communication System.
2
Connect the pen tablet to the USB port on the front panel of the
Communication System.
to
3
Press the
168
Using the Annotation Function
(USB) port
Pen tablet
(power) switch on the System to turn it on.
1
*
pen tablet