Evi-Hd7V/Hd3V - Sony IPELA PCS-XG100 Operating Instructions Manual

Switch Video format
position
No output
6
VISCA Control
7
1080i/50(25PsF)
8
1080p/25
9
720p/50
A
720p/25
B
C PAL(LB)
No output
D
E No output
No output
F
Yes: Outputs the image signal.
No: Does not output the image signal.
LB: Abbreviation of LETTER BOX. A
video signal with the 16:9 aspect ratio
is output by adding a blank area (no
signal, black) top and bottom to
display the image without distortion on
a monitor that uses the 4:3 aspect ratio.
Note
If the switch position is set to "no output," the
camera cannot be used.
Setting of the BOTTOM switches
Note
Do not change the BOTTOM switches from
their factory default positions.

EVI-HD7V/HD3V

Note
This camera unit is not supplied with the
PCS-XG100/XG77/XG100S/XG77S.
242
HD Camera Unit Parts Identification
Support
Camera
Front
– –
Yes –
Yes
Yes
50 Hz
Yes
system
Yes
No
– –
– –
– –
a Lens
b Remote sensors (for camera
c POWER lamp
d STANDBY lamp
1
2 3 4
This is a 10-magnification optical zoom
lens.
adjustment)
These are sensors for the supplied
remote commander.
Note
This is not available on the PCS-XG100/
XG77/XG100S/XG77S.
Lights when the camera is connected to
an AC outlet using the supplied AC
power adaptor and AC power cord.
Flashes in green when the camera
receives an operation command from the
supplied remote commander.
Lights when the camera is turned off
using the remote commander.