Tos Setup Menu; Re-Order Buffer; High Throughput - Sony IPELA PCS-XG100 Operating Instructions Manual

FEC Redundancy
Allows you to set redundancy of the packet
used for the Forward Error Correction (FEC).
You can select from among "8", "4", "2" and
"Auto". When you select "8", "4" and "2",
the communication bit rate may be different
from the specified value.
Audio Duplex Transmission
Allows you to select whether to
automatically transmit audio in double when
audio communication is interrupted
depending on a network status.
On: Enables the Audio Duplex
Transmission feature.
Off: Disables the Audio Duplex
Transmission feature.
QoS2
Re-Order/Shaping
Re-Order
Allows you to select whether to correct re-
order that may cause packet loss (invalid
order of arrival in the packet). Correcting re-
order enables smoother picture and sound.
On: Corrects re-order.
Off: Does not correct re-order.

Re-Order Buffer

Allows you to select re-order buffer.
You can select from among "Auto", "1", "2"
and "Custom".
Re-Order Buffer Rate
Enter the re-order buffer rate. You can enter
the value between 1 and 5.
Shaping
Allows you to select whether to use shaping,
which adjusts the IP packet transfer rate.
On: Uses shaping.
Off: Does not use shaping.
.

TOS Setup Menu

TOS
TOS
TOS Data Type
Allows you to select the type of data for which
you configure the TOS (Type of Service) field.
Video: Configure the TOS field for video
data.
Audio: Configure the TOS field for audio
data.
Data: Configure the TOS field for camera
control signals, etc.
Presentation: Configure the TOS field for
the DVI-I presentation data.
TOS
Allows you to select how to define the TOS
(Type of Service) field of the data selected in
"TOS Data Type".
Off: Does not define the TOS field.
IP Precedence: Defines the TOS field as IP
Precedence.
DSCP: Defines the TOS field as the
Differentiated Services Code Point
(DSCP). Enter the value between 0 and
63.
Precedence
Enter the IP Precedence value between 0 and
7.
Low Delay
Allows you to select whether to specify the
Low Delay bit of the TOS field.
On: Specifies the Low Delay bit of the TOS
field.
Off: Does not specify the Low Delay bit of
the TOS field.

High Throughput

Allows you to select whether to specify the
High Throughput bit of the TOS field.
On: Specifies the High Throughput bit of
the TOS field.
Off: Does not specify the High Throughput
bit of the TOS field.
High Reliability
Allows you to select whether to specify the
High Reliability bit of the TOS field.
On: Specifies the High Reliability bit of the
TOS field.
Off: Does not specify the High Reliability
bit of the TOS field.
Minimum Cost
Allows you to select whether to specify the
Minimum Cost bit of the TOS field.
Registering Local Information
83