System Connection - Sony SX-1062 Operating Instructions Manual

System Connection

The figure below shows an example where the system
is used as a guide system, combined with VCRs,
monitors and other equipment. In this example, the
two-channel four-group system is applied
(2CH/4GP•6CH/2GP switch is set to 2CH/4GP). Two
languages and four video programs are sent to four
different halls or booths. People in the hall can see the
desired programs on the corresponding monitors while
listening to the explanation through the same channel
Group D
SX-9133
LINE IN
Monitor D
3)
LINE OUT
AC IN
AC outlet
RADIATOR D
VCR D
1) You can listen to the explanation of the program through the same channel.
Example: CH0: English, CH2: Japanese
2) When making video cassette tapes, record the different language to audio channels L and R respectively.
Example: The explanation for CH0 is recorded in English in the channel L and the explanation for CH2 is recorded in Japanese in the
channel R of each video cassette tape.
3) 75-ohm coaxial cable with BNC connectors (RG-59B/U)
Group C Group B
SX-9133 SX-9133
LINE IN LINE IN
Monitor C
3)
LINE OUT
LINE IN LINE IN
AC outlet AC outlet
RADIATOR C RADIATOR B
RADIATOR
D C
3CH SYSTEM
NONE F 6CH SYSTEM
AUDIO CHANNEL INPUT
D C
3CH SYSTEM
4 2 ORG 4 2 ORG 4
10 8 6 4 2 ORG 10
F 6CH SYSTEM
VCR C
without changing the channel of the infrared receiver.
Note
Be sure to turn the power all related units off before
attempting to make any connections.
For a detailed explanation of how to connect and operate
peripheral equipment such as VCRs and monitors, refer to
the instruction manual supplied with peripheral equipment.
Video input connector
Group A
SX-9133
LINE IN
Monitor B Monitor A
3)
3)
LINE OUT LINE OUT
LINE IN
AC outlet
RADIATOR A
B A
NONE E
B A
2 ORG 4 2 ORG
8 6 4 2 ORG
E
Audio output Audio output
2)
connector R connector L
VCR B VCR A
Video output connector
SX-2130
SXA-33
LINE IN
SX-1062
AC IN
AC IN
AC power cord
(supplied)
AC outlet
2)
37