System Connection
The figure below shows an example of a system
where the system is combined with a simultaneous
interpretation conference system.
System application example
Audio source: SX-M700A Conference Control Console
Number of channels to be used: three channels plus original channel
1)
SX-9131A
AC outlet
LINE OUT
LINE IN
RADIATOR 2
SX-M700A
For a detailed explanation of how to configure a
simultaneous interpretation conference system that includes
the SX-7630/7631/7632, refer to the instruction manual
supplied with the simultaneous interpretation conference
system.
AC outlet
AC outlet
LINE IN
LINE OUT
75-ohm coaxial cable with BNC connectors
RADIATOR 1
Connection example
Note
Be sure to turn off the power of all related units
before attempting to make any connections.
AC outlet
AC outlet
LINE IN
LINE OUT
SX-1130A
AC IN
AC power cord
(supplied)
1) This application example takes
SX-9131A as an example of the
infrared radiator. You can use
the SW-9134 in the same way
as the SX-9131A.
SX-2130
Infrared
AC outlet
39