Selection Modes For Service-Related Operations - Denon AVR-X1100W Service Manual

3. Selection Modes for Service-related Operations

3.1. Actions
Select diagnostic mode (service path check mode), protection history display mode, or 232C standby clear mode.
3.2. Starting up
AVR-X1100W
Hold down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" at the same time and press the power button to turn on
the power.
AVR-S700W
Hold down buttons "TUNER PRESET CH+", "TUNE -" and TUNE +" at the same time and press the power button to turn
on the power.
Select the mode using the button "TUNER PRESET CH+", and press the button "STATUS" to commit the selection.
3.3. Displaying and Selecting Each Mode
The information shown on the display changes each time the button "TUNER PRESET CH+" is pressed.
Press the button "STATUS" to set the currently displayed mode and restart the device.
q
FLD
1 . S E R V I C E
check after repair.
w
FLD
2 . P R O T E C T I O N
e
FLD
4 . O P
r
FLD
5 . T U N E R
t
FLD
6 . R E M O T E
3.3. Canceling the mode
Press the power button to turn off the power.
Service Path Check Mode:
The Video and Audio paths can be checked.
This function is convenient for confirming problem paths in the product and executing a path
The protection history can be checked.
I N F O
Operation Info for the unit can be checked.
F R Q
Enables reception STEP of the ANALOG TUNER to be changed.
Function to operate only the desired AV receiver.
C H E C K
S E T
I D
23