Denon AVR-X1100W Service Manual page 21

1.5. Version Display in the Setup Menu
Follow the steps below to display the firmware information.
(1) Press the "SETUP" button on the remote control.
(2) Select "General - Information - Firmware".
The version information is displayed as a 12-digit number as shown in the screenshot below.
This 12-digit number comprises part of the version number of each device and module.
These version numbers correspond to the 12-digit number as shown below.
Mainμcom 0 0 2 3 0 0 1 6
DSP 8 6 0 2
A.PLD 2 7 0 5
GUI 6 7 1 1 0 0 0 6
DM860 FBL 1 3 1 0 2 8
DM860 SBL B 2 0 1 2 0 9 2 1 0 5 4 6
DM860 IMG I 2 0 1 2 1 0 2 2 0 9 5 8
The firmware version numbers and this 12-digit version information are written in the Service Information.
b
General/Firmware
Version
XXXX - XXXX - XXXX
GUI Image
The 6th digit from the right for Main μcom
The 5th digit from the right for Main μcom
The 2nd digit from the right for Main μcom
The 1st digit from the right for Main μcom
The 1st digit from the right for DSP
The 1st digit from the right for A.PLD
5 2 0 0 - 3 2 6 1 - 6 0 8 5
Info display
The 1st digit from the right for GUI
The 2nd digit from the right for GUI
The 1st digit from the right for IMG
The 2nd digit from the right for IMG
21