Denon AVR-X1100W Service Manual page 65

Error
Details of Error code
Code
Main CPU failed to receive firm-
11 ware for rewriting sent from
CX870 (when an error occurred).
Firmware for rewriting sent from
CX870 received by the Main CPU
12
contained corrupt data (Check
Sum error occurred).
The erasing of block data failed
13
before Main CPU was rewritten.
The rewriting of block data failed
14
when Main CPU was rewritten.
Data was found to be corrupt dur-
15 ing verification after the Main CPU
was rewritten.
Failed to acquire the IP address
20 before CX870 rewrite (Boot
Loader Mode). (Auto IP)
Failed to acquire the IP address
21 before CX870 rewrite (Boot
Loader Mode). (when timed out)
22 Failed to log in to DPMS.
Line etc. is congested when log-
23
ging in to DPMS.
24 Connection to DPMS failed.
25 Failed to change the CX870 mode.
Timeout occurred obtaining data
when downloading the Main CPU
26 firmware.Received an invalid pa-
cage version. Received an invalid
pacage version.
27 Failed to change the CX870 mode.
Log in to DPMS failed when re-
36
writing the Main CPU.
Unit logs in to DPMS but the line
37 etc. is congested when rewriting
the Main CPU.
Connect to DPMS failed when
38
rewriting the Main CPU.
Display
U p d a t i n g
U p d a t i n g
E r a s e f a i l
U p d a t i n g
U p d a t e C h e c k N G
C o n n e c t i o n F a i l 2 0
C o n n e c t i o n F a i l 2 1
L o g i n f a i l e d
S e r v e r i s
C o n n e c t i o n F a i l 2 4
C o n n e c t i o n F a i l 2 5
D o w n l o a d
D o w n l o a d
L o g i n f a i l e d
S e r v e r i s
C o n n e c t i o n F a i l 3 8
65
Turn on the power again. Update will
f a i l 1 1
start automatically.
Turn on the power again. Update will
f a i l 1 2
start automatically.
Turn on the power again. Update will
1 3
start automatically.
Turn on the power again. Update will
f a i l 1 4
start automatically.
Turn on the power again. Update will
1 5
start automatically.
Check the network connection. Update
in an environment where there is a
small network load.
Check the network connection. Update
in an environment where there is a
small network load.
Initialize the unit and try updating
again.
2 2
Update in an environment where there
is a small network load.
Update in an environment where there
b u s y 2 3
is a small network load.
Check the network connection. Update
in an environment where there is a
small network load.
Initialize the unit and try updating
again.
Check the network connection. Update
in an environment where there is a
f a i l 2 6
small network load.
Initialize the unit and try updating
f a i l 2 7
again.
Update in an environment where there
3 6
is a small network load.
Update in an environment where there
b u s y 3 7
is a small network load.
Check the network connection. Update
in an environment where there is a
small network load.
Coping strategies