3.5.4.
Clearing the Protection History
There are two ways to clear the protection history.
(1) Start Protection History Display Mode. Press the button "STATUS" to display the protection history. Press and hold the
button "DIMMER" for 3 seconds.
FLD
P R T : D C
FLD
P R T : C L E A R
FLD
N O
P R O T E C T
(2) Initialize this unit. ( "See "Initializing This Unit"
Use the method in 3.5.3.(1) if you do not want to erase your settings from this unit.
b
Warning Displays by POWER LED
If the power is turned off while a protection is detected, the POWER LED (red) flashes in the following ways as a warning
according to the protection status.
(1) ASO/DC protection: Flashes in 0.5-second cycles (0.25 seconds lit, 0.25 seconds unlit)
(2) THERMAL (A/B) protection: Flashes in 2-second cycles (1 second lit, 1 second unlit)
Press and hold the button "DIMMER" for 3 seconds.
The above is displayed and the protection history is cleared.
11 page
)
46