Troubleshooting For Ffq Series; Indoor Unit Pcb Abnormality - Daikin 2MXS-N Series Service Manual

SiUS121502E

6. Troubleshooting for FFQ Series

6.1

Indoor Unit PCB Abnormality

A1
Error Code
Method of Error The system checks the data from EEPROM.
Detection
Error Decision The data from the EEPROM is not received correctly.
Conditions
EEPROM (Electrically Erasable Programmable Read Only Memory): A memory chip that holds its
content without power. It can be erased, either within the computer or externally and usually
requires more voltage for erasure than the common +5 volts used in logic circuits. It functions like
non-volatile RAM, but writing to EEPROM is slower than writing to RAM.
Supposed
Causes
Troubleshooting
Service Diagnosis
Defective indoor unit PCB
External factor (noise etc.)
Be sure to turn off the power switch before connecting or disconnecting
Caution connectors, or parts may be damaged.
Turn off the power. Then, turn on
the power to restart the system.
Normal?
YES
NO

Troubleshooting for FFQ Series

Replace the indoor unit PCB
(control PCB).
External factor other than malfunction
(for example, noise etc.)
(R22247)
127