Daikin 2MXS-N Series Service Manual page 98

FFQ Series
1. Operation mode selector button
Press this button to select the operation
mode of your preference.
* Available modes vary with the indoor unit
model.
2. Fan speed control button
Press this button to select the fan speed of
your preference.
* Available fan speeds vary with the indoor
unit model.
3. Menu/OK button
Used to indicate the main menu.
Used to enter the selected item.
4. Up button
Used to raise the setpoint.
The item above the current selection will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
5. Down button
Used to lower the setpoint.
The item below the current selection will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
6. Right button
Used to highlight the next items on the
right-hand side.
Each screen is scrolled in the right-hand
direction.
86
7. Left button
Used to highlight the next items on the
left-hand side.
Each screen is scrolled in the left-hand
direction.
8. On/Off button
Press this button and system will start.
Press this button again to stop the system.
9. Operation lamp (Green)
This lamp illuminates solid during normal
operation.
This lamp blinks if a error occurs.
10. Cancel button
Used to return to the previous screen.
11. LCD (with backlight)
The backlight will be illuminated for
approximately 30 seconds by pressing any
button.
If two remote controllers are used to control
a single indoor unit, only the controller to be
accessed first will have backlight
functionality.
SiUS121502E
Remote Controller