Replacing The Auxiliary Light Bulb - Yamaha MT07A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into
6
position, then secure it with the
bulb holder.
5. Install the headlight bulb cover,
then connect the coupler.
6. Install the headlight unit as shown,
and then install the washer and
bolt on each side.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
2
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
2. Remove the auxiliary light bulb
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
6-34
page 6-33.)
socket (together with the bulb) by
turning it counterclockwise.
1
pulling it out of the socket.
EAU46405