1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. MT07 TRACER
  6. Owner's manual

Yamaha MT07 Owner's Manual

Hide thumbs Also See for MT07:
Table of Contents

Advertisement

Quick Links

Read this manual carefully before operating this vehicle.
OWNER'S MANUAL
MT07
MT07A
1WS-28199-E3

Advertisement

Table of Contents
loading

Related Manuals for Yamaha MT07

Summary of Contents for Yamaha MT07

  • Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL MT07 MT07A 1WS-28199-E3...
  • Page 2 EAU69860 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. YAMAHA MOTOR ELECTRONICS CO., LTD. 1450-6, Mori, Mori-machi, Shuchi-gun, Shizuoka-ken, 437-0292 Japan DECLARATION of CONFORMITY Product: IMMOBILIZER Model: 1WS-00 Supplied by...
  • Page 3 Yamaha a reputation for dependability. Please take the time to read this manual thoroughly, so as to enjoy all advantages of your MT07 / MT07A. The Owner’s Manual does not only instruct you in how to operate, inspect and maintain your motorcycle, but also in how to safeguard yourself and others from trouble and injury.

  • Page 4: Important Manual Information

    Important manual information EAU10134 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 5 Important manual information EAU10201 MT07 / MT07A OWNER’S MANUAL ©2015 by Yamaha Motor Co., Ltd. 1st edition, May 2015 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.

  • Page 6: Table Of Contents

    Table of contents Safety information......1-1 Ignition circuit cut-off system ..3-25 Cast wheels ........6-18 Auxiliary DC connector ....3-27 Adjusting the clutch lever free Description ........2-1 play..........6-18 Left view ......... 2-1 For your safety – pre-operation Checking the brake lever free Right view........
  • Page 7 Table of contents Replacing the headlight bulb..6-32 Replacing the auxiliary light bulb ..........6-34 Tail/brake light.......6-35 Replacing a turn signal light bulb ..........6-35 Replacing the license plate light bulb ..........6-36 Supporting the motorcycle....6-36 Front wheel (for non-ABS models)....6-37 Rear wheel (for non-ABS models)....6-39 Troubleshooting ......6-41 Troubleshooting charts ....6-42 Motorcycle care and storage ..7-1...

  • Page 8: Safety Information

    Safety information  Never operate a motorcycle with- pears to be very effective in reduc- EAU1028B out proper training or instruction. ing the chance of this type of Take a training course. Beginners accident. Be a Responsible Owner should receive training from a cer- Therefore: As the vehicle’s owner, you are re- tified instructor.
  • Page 9 Safety information  Many accidents involve inexperi- • Always signal before turning or Protective Apparel enced operators. In fact, many op- changing lanes. Make sure that The majority of fatalities from motorcy- erators who have been involved in other motorists can see you. cle accidents are the result of head in- ...
  • Page 10 173 kg (381 lb) (MT07A) lated or partially enclosed areas fork, or front fender. These 176 kg (388 lb) (MT07) such as barns, garages, or car- items, including such cargo as ports. sleeping bags, duffel bags, or...
  • Page 11 Yamaha accessories, which are avail- performed to your vehicle that change lightweight as possible and able only from a Yamaha dealer, have any of the vehicle’s design or operation should be kept to a minimum. been designed, tested, and approved characteristics can put you and others •...

  • Page 12: Specifications

    Safety information  Check that the fuel cock (if operator and may limit control ability, therefore, such accesso- equipped) is in the “OFF” position ries are not recommended. and that there are no fuel leaks.  Use caution when adding electri- ...

  • Page 13: Description

    Description EAU10411 Left view 1. Auxiliary DC connector (page 3-27) 9. Engine oil filter cartridge (page 6-9) 2. Seat lock (page 3-19) 10.Coolant reservoir (page 6-11) 3. Storage compartment (page 3-22) 4. Owner’s tool kit (page 6-2) 5. Shift pedal (page 3-14) 6.

  • Page 14: Right View

    Description EAU10421 Right view 1. Fuses (page 6-31) 9. Rear brake fluid reservoir (page 6-21) 2. Battery (page 6-29) 3. Shock absorber assembly spring preload adjusting ring (page 3-22) 4. Fuel tank cap (page 3-16) 5. Headlight (page 6-32) 6. Coolant drain bolt (page 6-12) 7.

  • Page 15: Controls And Instruments

    Description EAU10431 Controls and instruments 1. Clutch lever (page 3-14) 2. Left handlebar switches (page 3-13) 3. Multi-function meter unit (page 3-6) 4. Main switch/steering lock (page 3-2) 5. Front brake fluid reservoir (page 6-21) 6. Right handlebar switches (page 3-13) 7.

  • Page 16: Instrument And Control Functions

     Do not expose any key to exces- cess, take the vehicle along with all three keys to a Yamaha dealer to have sively high temperatures.  Do not place any key close to them re-registered. Do not use the key with the red bow for driving.

  • Page 17: Main Switch/Steering Lock

    Instrument and control functions  Keep other immobilizer system EAU10474 EAU38531 Main switch/steering lock keys away from the main switch All electrical circuits are supplied with as they may cause signal inter- power; the meter lighting, taillight, li- ference. cense plate light and auxiliary light come on, and the engine can be start- ed.
  • Page 18 Instrument and control functions The steering must be locked before the EAU10686 LOCK key can be turned to “ ”. The steering is locked and all electrical If the steering will not lock, try turning ECA20760 systems are off. The key can be re- the handlebars back to the right slight- NOTICE moved.

  • Page 19: Indicator Lights And Warning Lights

    High beam indicator light “ ” is correct, immediately turn the en- This indicator light comes on when the gine off and have a Yamaha dealer high beam of the headlight is switched check the vehicle. EAU59962 If the warning light does not go off after Oil pressure warning light “...
  • Page 20 Instrument and control functions  does not come on when the key is The electrical circuit of the warning have a Yamaha dealer check the self- light can be checked by turning the key diagnosis system. (See page 3-12 for turned to “ON”...

  • Page 21: Multi-Function Meter Unit

    “ON”, multi-function meter unit or if the indicator light remains on, have equipped with the following: a Yamaha dealer check the electrical  speedometer circuit.  tachometer The self-diagnosis device also detects  clock problems in the immobilizer system ...
  • Page 22 Instrument and control functions Tachometer Clock EWA12423 WARNING Be sure to stop the vehicle before making any setting changes to the multi-function meter unit. Changing settings while riding can distract the operator and increase the risk of an accident.  Except when accessing 1.
  • Page 23 Fuel meter  Travel at a constant speed. warning indicator will flash repeatedly.  Select the transmission gear that If this occurs, have a Yamaha dealer check the vehicle. is appropriate for the vehicle speed. Eco indicator Transmission gear display 1.
  • Page 24 Instrument and control functions Multi-function display stantaneous fuel consumption “km/L” or “L/100 km”, average fuel consump-  Push the right set button to chan- tion “AVE_ _._ km/L” or “AVE_ _._ ge the display in the reverse order. L/100 km”, coolant temperature “_ _ ...
  • Page 25 Instrument and control functions  You can manually reset the fuel re-  “L/100 km”: The amount of fuel Fuel reserve tripmeter When the fuel level becomes low, the serve tripmeter, or after refueling necessary to travel 100 km under fuel level warning indicator and the last and traveling 5 km (3 mi) it will re- the current riding conditions is...
  • Page 26 Instrument and control functions This function calculates the average Coolant temperature Air temperature fuel consumption since it was last re- set. The average fuel consumption can be set to either “AVE_ _._ km/L”, “AVE_ _._ L/100 km” or “AVE_ _._ MPG” (for the UK).
  • Page 27 2. Push and hold the left set button. a Yamaha dealer to have them re- play changes to self-diagnosis mode. If 3. Turn the key to “ON” and continue registered.

  • Page 28: Handlebar Switches

    Instrument and control functions EAU1234H EAU12351 Set this switch to “ ” to stop the en- Handlebar switches Pass switch “ ” gine in case of an emergency, such as Press this switch to flash the headlight. when the vehicle overturns or when the Left throttle cable is stuck.

  • Page 29: Clutch Lever

    Instrument and control functions EAU12822 EAU12872 EAU26825 Clutch lever Shift pedal Brake lever The brake lever is located on the right side of the handlebar. To apply the front brake, pull the lever toward the throttle grip. 1. Clutch lever 1.

  • Page 30: Brake Pedal

    EAU60021 Brake pedal ABS (for ABS models)  The ABS performs a self-diagno- The Yamaha ABS (Anti-lock Brake sis test each time the vehicle first System) features a dual electronic con- starts off after the key is turned to trol system, which acts on the front and “ON”...

  • Page 31: Fuel Tank Cap

    Instrument and control functions EAU13075 Fuel tank cap The fuel tank cap cannot be closed un- less the key is in the lock. In addition, the key cannot be removed if the cap is not properly closed and locked. EWA11092 WARNING Make sure that the fuel tank cap is properly closed after filling fuel.

  • Page 32: Fuel

    WARNING pump nozzle into the fuel tank filler Gasoline is poisonous and can cau- Your Yamaha engine has been de- hole. Stop filling when the fuel se injury or death. Handle gasoline signed to use regular unleaded gaso- reaches the bottom of the filler with care.

  • Page 33: Fuel Tank Breather Hose And Overflow Hose

    10% (E10). Gas-  Do not park the vehicle near ohol containing methanol is not possible fire hazards such as recommended by Yamaha because it grass or other materials that can cause damage to the fuel system easily burn.

  • Page 34: Seats

    Instrument and control functions To install the passenger seat ECA10702 EAU59901 Seats NOTICE 1. Insert the projections on the front Use only unleaded gasoline. The use of the passenger seat into the seat Passenger seat of leaded gasoline will cause unre- holders as shown, and then push pairable damage to the catalytic the rear of the seat down to lock it...

  • Page 35: Helmet Holding Cable

    Instrument and control functions To install the rider seat EAU59981 Helmet holding cable 1. Fit the slot in the seat onto the pro- A helmet holding cable is located on jection on the frame cross mem- the bottom of the passenger seat. Use ber as shown, and then place the this cable in conjunction with the seat in the original position.
  • Page 36 Instrument and control functions To release a helmet from the helmet holding cable When removing the screwdriver, slide Make sure that the screwdriver is se- 1. Remove the passenger seat. the screwdriver toward the “ ” mark curely positioned between its holders, 2.

  • Page 37: Storage Compartment

    EAU14465 EAU47001 Storage compartment Adjusting the shock absorber load of 173 kg (381 lb) (MT07A) assembly 176 kg (388 lb) (MT07) for the ve- This shock absorber assembly is hicle. equipped with a spring preload adjust- ing ring. ECA10102 NOTICE...

  • Page 38: Luggage Strap Holders

     Do not dispose of a damaged or 2. Hook 4. Position indicator worn-out shock absorber as- Spring preload setting: sembly yourself. Take the shock Minimum (soft): absorber assembly to a Yamaha dealer for any service. Standard: Maximum (hard): EWA10222 WARNING This shock absorber assembly con- 1.

  • Page 39: Sidestand

    EAU15306 Sidestand passenger seat. (See page 3-19.) Un- Yamaha dealer repair it if it does not The sidestand is located on the left hook the straps from the hooks, and function properly. side of the frame. Raise the sidestand...

  • Page 40: Ignition Circuit Cut-Off System

    Instrument and control functions EAU68280 Ignition circuit cut-off system The ignition circuit cut-off system (comprising the sidestand switch, clutch switch and neutral switch) has the following functions.  It prevents starting when the transmission is in gear and the sidestand is up, but the clutch le- ver is not pulled.
  • Page 41 Instrument and control functions WARNING With the engine turned off: 1. Move the sidestand down. If a malfunction is noted, have a Yamaha 2. Make sure that the start/engine stop switch is set to “ ”. dealer check the system before riding.

  • Page 42: Auxiliary Dc Connector

    Instrument and control functions This vehicle is equipped with an auxil- EAU59950 Auxiliary DC connector iary DC connector. A 12–V accessory EWA12532 connected to the auxiliary DC connec- WARNING tor can be used when the key is in the To prevent electrical shock or short- “ON”...

  • Page 43: For Your Safety - Pre-Operation Checks

    • If necessary, add recommended coolant to specified level. 6-11 Coolant • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check brake pads for wear. Front brake • Replace if necessary. 6-20, 6-21 •...
  • Page 44 • Make sure that operation is smooth. • Check throttle grip free play. 6-15, 6-25 Throttle grip • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca- ble and grip housing. • Make sure that operation is smooth. Control cables 6-25 •...
  • Page 45 • Tighten if necessary. Instruments, lights, signals • Check operation. — and switches • Correct if necessary. • Check operation of ignition circuit cut-off system. Sidestand switch 3-24 • If system is not working correctly, have Yamaha dealer check vehicle.

  • Page 46: Operation And Important Riding Points

     a lean angle sensor to stop the en-  The transmission is in the neutral understand, ask your Yamaha dealer. gine in case of a turnover. In this EWA10272 position.

  • Page 47: Shifting

    3-4 neutral position. The neutral indi- for the corresponding warning cator light should come on. If not, and indicator light circuit check. ask a Yamaha dealer to check the  After going off once, the oil electrical circuit. pressure warning...
  • Page 48 Operation and important riding points 4. At the recommended shift points clutch lever in, use the brakes to ECA10261 NOTICE shown in the following table, close slow the motorcycle, and continue  Even with the transmission in the throttle, and at the same time, to downshift as necessary.

  • Page 49: Tips For Reducing Fuel Consumption

    Operation and important riding points EAU64150 EAU16811 EAU16842 Recommended shift points Tips for reducing fuel con- Engine break-in The recommended shift points during sumption There is never a more important period acceleration and deceleration are in the life of your engine than the period Fuel consumption depends largely on shown in the table below.

  • Page 50: Parking

    Yamaha dealer check the vehi- touch them and be burned. cle.  Do not park on a slope or on soft...

  • Page 51: Periodic Maintenance And Adjustment

    To avoid possible burns, let tivities incorrectly may increase brake components cool before your risk of injury or death during touching them. service or while using the vehicle. If you are not familiar with vehicle ser- vice, have a Yamaha dealer perform service.

  • Page 52: Owner's Tool Kit

    Owner’s tool kit If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you. 1. Owner’s tool kit The owner’s tool kit is located under the passenger seat. Some tools are also located on the bottom of the pas- senger seat.

  • Page 53: Periodic Maintenance Chart For The Emission Control System

     From 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (6000 mi).  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech- nical skills.

  • Page 54: General Maintenance And Lubrication Chart

    Periodic maintenance and adjustment EAU1770M General maintenance and lubrication chart ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) √ 1 * Air filter element •...
  • Page 55 Periodic maintenance and adjustment ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) • Check operation and for exces- √ √...
  • Page 56 Periodic maintenance and adjustment ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) • Check operation and for oil leak- √...
  • Page 57 Periodic maintenance and adjustment EAU18681  Air filter • This model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with com- pressed air to avoid damaging it. • The air filter element needs to be replaced more frequently when riding in unusually wet or dusty areas. ...

  • Page 58: Checking The Spark Plugs

    1/2 turn past finger tight. However, the Yamaha dealer. Since heat and depos- with a wire thickness gauge and, if spark plug should be tightened to the its will cause any spark plug to slowly necessary, adjusted to specification.

  • Page 59: Engine Oil And Oil Filter Cartridge

    Periodic maintenance and adjustment 4. Remove the engine oil filler cap, EAU60471 Engine oil and oil filter car- the engine oil drain bolt and its tridge gasket to drain the oil from the The engine oil level should be checked crankcase.
  • Page 60 Make sure that the O-ring is properly 17 Nm (1.7 m·kgf, 12 ft·lbf) An oil filter wrench is available at a seated. Yamaha dealer. 8. Install the engine oil drain bolt and 7. Install the new oil filter cartridge its new gasket, and then tighten 6.

  • Page 61: Coolant

     The coolant level must  In order to prevent clutch slip- gine off and have a Yamaha dealer checked on a cold engine since check the vehicle. page (since the engine oil also the level varies with engine tem- lubricates the clutch), do not 11.

  • Page 62: Change Coolant

    If water has been added to the coolant, have a Yamaha dealer check the anti- freeze content of the coolant as 6-12...
  • Page 63 Periodic maintenance and adjustment 5. Remove the coolant reservoir cap. 8. Remove the coolant drain bolt and its gasket to drain the coolant from the cooling system. 1. Radiator cap 2. Radiator cap retaining bolt 1. Coolant reservoir cap 2. Coolant reservoir 4.

  • Page 64: Replacing The Air Filter Element And Cleaning The Check Hose

    EAU60451 Antifreeze/water mixture ratio: Replacing the air filter ele- the vehicle for coolant leakage. If ment and cleaning the check coolant is leaking, have a Yamaha Recommended antifreeze: hose High-quality ethylene glycol anti- dealer check the cooling system. freeze containing corrosion inhibi-...

  • Page 65: Checking The Throttle Grip Free Play

    The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. 1. Throttle grip free play The throttle grip free play should mea- sure 3.0–5.0 mm (0.12–0.20 in) at the...

  • Page 66: Tires

    Never overload your vehicle. Opera- Operation of this vehicle with im- wall is cracked, have a Yamaha dealer tion of an overloaded vehicle could proper tire pressure may cause se- replace the tire immediately.
  • Page 67 Tire information characteristics of the motorcy- EWA10472 WARNING cle may be different, which  Have a Yamaha dealer replace could lead to an accident.  Always make sure that the valve excessively worn tires. Besides being illegal, operating the vehi-...

  • Page 68: Cast Wheels

    If any damage is found, have high speeds. a Yamaha dealer replace the  Brand-new tires can have a rel- wheel. Do not attempt even the atively poor grip on certain road smallest repair to the wheel.

  • Page 69: Checking The Brake Lever Free Play

    There should be no free play at the play, turn the adjusting nut in di- brake lever end. If there is free play, rection (b). have a Yamaha dealer inspect the brake system. EWA14212 WARNING A soft or spongy feeling in the brake lever can indicate the presence of air in the hydraulic system.

  • Page 70: Brake Light Switches

    EAU36891 takes effect. If necessary, have a Front brake pads Yamaha dealer adjust the brake light switches. 1. Rear brake light switch 2. Rear brake light switch adjusting nut The brake light, which is activated by...

  • Page 71: Checking The Brake Fluid Level

    Rear brake EAU40262 Checking the brake fluid level Yamaha dealer replace the brake pads Before riding, check that the brake fluid as a set. is above the minimum level mark. Check the brake fluid level with the top...

  • Page 72: Changing The Brake Fluid

    EAU22733 Changing the brake fluid id; otherwise, the rubber seals Yamaha dealer check the cause before Have a Yamaha dealer change the may deteriorate, causing leak- further riding. brake fluid at the intervals specified in age.

  • Page 73: Drive Chain Slack

    To adjust the drive chain slack turn the adjusting nut at each end 3. Push down on the drive chain un- Consult a Yamaha dealer before ad- of the swingarm in direction (b), der the end of the drive chain gui- justing the drive chain slack.

  • Page 74: Cleaning And Lubricating The Drive Chain

    Periodic maintenance and adjustment occurring, keep the drive chain EAU23026 Cleaning and lubricating the slack within the specified limits. drive chain [ECA23070] The drive chain must be cleaned and lubricated at the intervals specified in the periodic maintenance and lubrica- tion chart, otherwise it will quickly wear out, especially when riding in dusty or wet areas.

  • Page 75: Checking And Lubricating The Cables

    Yamaha dealer at the intervals cated if necessary. If a cable is specified in the periodic maintenance damaged or does not move smoothly, chart.

  • Page 76: Checking And Lubricating The Brake And Shift Pedals

    Periodic maintenance and adjustment EAU44276 EAU23144 Recommended lubricant: Checking and lubricating the Checking and lubricating the Lithium-soap-based grease brake and shift pedals brake and clutch levers The operation of the brake and shift The operation of the brake and clutch pedals should be checked before each levers should be checked before each ride, and the pedal pivots should be lu-...

  • Page 77: Checking And Lubricating The Sidestand

    The operation of the sidestand should The pivoting points of the rear suspen- be checked before each ride, and the sion must be lubricated by a Yamaha sidestand pivot and metal-to-metal dealer at the intervals specified in the contact surfaces should be lubricated periodic maintenance and lubrication if necessary.

  • Page 78: Lubricating The Swingarm Pivots

    The swingarm pivots must be lubricat- ce and hold it in an upright posi- fork does not operate smoothly, ed by a Yamaha dealer at the intervals tion. WARNING! To avoid injury, have a Yamaha dealer check or re- specified in the periodic maintenance securely support the vehicle so pair it.

  • Page 79: Checking The Steering

    If any free This model is equipped with a VRLA smoothly, have a Yamaha dealer play can be felt, have a Yamaha (Valve Regulated Lead Acid) battery. check the wheel bearings. dealer check or repair the steer- There is no need to check the electro- ing.
  • Page 80 To charge the battery ge it if necessary. Have a Yamaha dealer charge the bat- 3. Fully charge the battery before installation. NOTICE: When in- tery as soon as possible if it seems to have discharged.

  • Page 81: Replacing The Fuses

    Periodic maintenance and adjustment MT07 MT07A EAU59871 Replacing the fuses The main fuse and the fuse boxes, 9 10 which contain the fuses for the individ- 1 2 3 4 5 1 2 3 4 5 ual circuits, are located under the rider seat.

  • Page 82: Replacing The Headlight Bulb

    If the headlight bulb age to the electrical system and 4. If the fuse immediately blows burns out, replace it as follows. possibly a fire. again, have a Yamaha dealer [EWA15132] ECA10651 check the electrical system. NOTICE Specified fuses:...
  • Page 83 Periodic maintenance and adjustment 1. Do not touch the glass part of the bulb. 1. Bolt and washer 1. Headlight bulb holder 2. Headlight bulb 1. Remove the headlight unit by re- 2. Disconnect the headlight coupler, 4. Place a new headlight bulb into moving the bolt and washer on and then remove the headlight position, then secure it with the...

  • Page 84: Replacing The Auxiliary Light Bulb

    Periodic maintenance and adjustment 7. Have a Yamaha dealer adjust the EAU46405 Replacing the auxiliary light headlight beam if necessary. bulb If the auxiliary light bulb burns out, re- place it as follows. 1. Remove the headlight unit. (See page 6-32.) 2.

  • Page 85: Tail/Brake Light

    1. Remove the turn signal light lens If the tail/brake light does not come on, by removing the screw. have a Yamaha dealer check it. 1. Turn signal light bulb 3. Insert a new bulb into the socket, push it in, and then turn it clock- wise until it stops.

  • Page 86: Replacing The License Plate Light Bulb

    Periodic maintenance and adjustment EAU59890 EAU24351 Replacing the license plate Supporting the motorcycle light bulb Since this model is not equipped with a centerstand, follow these precautions 1. Remove the license plate light unit when removing the front and rear by removing the nuts, washers wheel or performing other mainte- and collars, and then remove the...

  • Page 87: Front Wheel (For Non-Abs Models)

    EWA14841 WARNING For the ABS model, have a Yamaha dealer remove and install the wheel. EAU59931 1. Front wheel axle pinch bolt 2. Wheel axle To remove the front wheel 3.
  • Page 88 Periodic maintenance and adjustment 3. Lower the front wheel so that it is Tightening torques: on the ground, and then put the Wheel axle: sidestand down. 65 Nm (6.5 m·kgf, 47 ft·lbf) Front wheel axle pinch bolt: 4. Install the brake calipers by install- 23 Nm (2.3 m·kgf, 17 ft·lbf) ing the bolts.

  • Page 89: Rear Wheel (For Non-Abs Models)

    Periodic maintenance and adjustment EAU44802 Rear wheel (for non-ABS models) EWA14841 WARNING For the ABS model, have a Yamaha dealer remove and install the wheel. EAU59942 1. Drive chain slack adjusting plate 2. Drive chain slack adjusting nut To remove the rear wheel ...
  • Page 90 Periodic maintenance and adjustment  Make sure that the slot in the brake caliper bracket is fit over the retainer on the swingarm.  Make sure that there is enough space between the brake pads before installing the wheel.  If the chain puller is removed, make sure that the arrow mark on 1.

  • Page 91: Troubleshooting

    The following troubleshooting charts represent quick and easy procedures for checking these vital systems your- self. However, should your motorcycle require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the motorcycle properly.

  • Page 92: Troubleshooting Charts

    Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the compression. 4. Compression The engine does not start. There is compression.
  • Page 93 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended cool- ant as soon as possible.

  • Page 94: Motorcycle Care And Storage

    Some models are equipped with matte colored finished parts. Be ble. Rust and corrosion can develop Cleaning sure to consult a Yamaha dealer for even if high-quality components are ECA10773 NOTICE used. A rusty exhaust pipe may go un-...
  • Page 95 Motorcycle care and storage off any detergent residue using shield. Test the product on a plenty of water, as it is harmful small hidden part of the wind- Salt sprayed on roads in the winter to plastic parts. shield to make sure that it does may remain well into spring.

  • Page 96: Storage

    EWA11132 poorly ventilated room or cover- WARNING ing it with a tarp, while it is still  Consult a Yamaha dealer for ad- Contaminants on the brakes or tires wet, will allow water and humid- can cause loss of control.
  • Page 97 Motorcycle care and storage 2. Fill up the fuel tank and add fuel e. Remove the spark plug caps stabilizer (if available) to prevent from the spark plugs, and then Make any necessary repairs before the fuel tank from rusting and the install the spark plugs and the storing the motorcycle.

  • Page 98: Specifications

    Overall height: 1WS1 00 (MT07) Engine oil: 1090 mm (42.9 in) 1WS1 00 (MT07A) Seat height: Recommended brand: 1WS2 20 (MT07 [35 kW]) 805 mm (31.7 in) YAMALUBE 1WS2 20 (MT07A [35 kW]) SAE viscosity grades: Spark plug(s): Wheelbase: 1400 mm (55.1 in)
  • Page 99 Loading: Front suspension: 1.300 (26/20) Maximum load: Type: 5th: 173 kg (381 lb) (MT07A) Telescopic fork 1.091 (24/22) 176 kg (388 lb) (MT07) Spring: 6th: (Total weight of rider, passenger, cargo Coil spring 0.964 (27/28) and accessories) Shock absorber: Chassis:...
  • Page 100 Specifications Bulb wattage × quantity: Auxiliary fuse: 2.0 A Headlight: Headlight fuse: H4, 60.0 W/55.0 W x 1 15.0 A Brake/tail light: Signaling system fuse: 10.0 A Front turn signal light: 10.0 W × 2 Ignition fuse: 10.0 A Rear turn signal light: 10.0 W ×...

  • Page 101: Consumer Information

    These identification numbers are needed when registering the vehicle with the authorities in your area and when ordering spare parts from a Yamaha dealer. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number 1. Engine serial number The vehicle identification number is The engine serial number is stamped stamped into the steering head pipe.
  • Page 102 Consumer information The model label is affixed to the frame under the passenger seat. (See page 3-19.) Record the information on this label in the space provided. This infor- mation will be needed when ordering spare parts from a Yamaha dealer.

  • Page 103: Index

    Index Engine serial number ......9-1 Multi-function meter unit ......3-6 Engine trouble warning light ....3-5 ABS (for ABS models) ......3-15 ABS warning light (for ABS models) ..3-5 Neutral indicator light ......3-4 Air filter element and check hose, Front and rear brake pads, checking ...
  • Page 104 Index Tool kit ............6-2 Troubleshooting ........6-41 Troubleshooting charts......6-42 Turn signal indicator lights......3-4 Turn signal light bulb, replacing....6-35 Turn signal switch .........3-13 Valve clearance........6-15 Vehicle identification number ....9-1 Wheel bearings, checking.....6-29 Wheel, front (for non-ABS models) ..6-37 Wheel, rear (for non-ABS models) ..6-39 Wheels ..........6-18 10-2...
  • Page 106 Original instructions PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2015.06-0.5×1 CR...

This manual is also suitable for:

Mt07a

Table of Contents