Yamaha MT07A Owner's Manual page 82

PERIODIC MAINTENANCE AND ADJUSTMENT
MT07A
6
1 2 3 4 5
12
12
1. Ignition fuse
2. Signaling system fuse
3. Headlight fuse
6
4. Fuel injection system fuse
5. Backup fuse (for clock and immobilizer sys-
tem)
6. Radiator fan motor fuse
7. ABS solenoid fuse
8. ABS motor fuse
9. Parking lighting fuse
10.Auxiliary fuse
11.ABS control unit fuse
12.Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
7 8
9 10
avoid causing extensive dam-
11
age to the electrical system and
possibly a fire.
Specified fuses:
Main fuse:
30.0 A
Auxiliary fuse:
2.0 A
Headlight fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Parking lighting fuse:
7.5 A
Radiator fan motor fuse:
10.0 A
ABS motor fuse:
MT07A 30.0 A
ABS solenoid fuse:
MT07A 20.0 A
Fuel injection system fuse:
10.0 A
ABS control unit fuse:
MT07A 7.5 A
Backup fuse:
7.5 A
3. Turn the key to "ON" and turn on
4. If the fuse immediately blows
[EWA15132]
6-32
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.