Headlights; Replacing A Front Turn Signal Light Bulb Or An Auxiliary Light Bulb - Yamaha Lexi ABS GDS125-A Owner's Manual

Headlights

This model is equipped with LED-type
headlights.
If a headlight does not come on, have
a Yamaha dealer check its electrical
circuit.
NOTICE
Do not affix any type of tinted film or
stickers to the headlight lens.
Periodic maintenance and adjustment
EAU64070
Replacing a front turn signal
light bulb or an auxiliary light
bulb
If a front turn signal light or an auxiliary
light bulb burns out, replace it as fol-
lows.
ECA16581
1. Place the motorcycle on the cen-
terstand.
2. Remove panel A. (See page 9-8.)
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
2
1. Turn signal light bulb socket
2. Auxiliary light bulb socket
4. Remove the burnt out bulb by
pulling it out.
5. Insert a new bulb into the socket.
9-32
EAUN1970
NOTICE
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panel.
ECAU0081
9