Yamaha MT07A Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
Coolant temperature mode
3
1. Coolant temperature display
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message "HI" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 6-44.)
TIP
 When the coolant temperature is
below 40 °C, "LO" will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Ambient temperature mode
1
1. Ambient temperature display
This display shows the ambient tem-
perature from –9 °C to 99 °C in 1 °C in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
TIP
 When the ambient temperature is
below –9 °C, "LO" will be dis-
played.
 The accuracy of the temperature
reading may be affected when rid-
ing slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
Self-diagnosis mode
1
1. Error code display
2. Engine trouble warning light "
3. Immobilizer system indicator light "
This model is equipped with a self-di-
agnosis device for various electrical
circuits.
If a problem is detected in any of those
circuits, the engine trouble warning
light will come on and the display will
indicate an error code.
If the display indicates any error codes,
note the code number, and then have
a Yamaha dealer check the vehicle.
The self-diagnosis device also detects
problems in the immobilizer system
circuits.
3-11
1
2 3
"
"