Luggage Strap Holders - Yamaha MT07A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
3
1. Extension bar
2. Special wrench
3. Spring preload adjusting ring
4. Position indicator
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
9
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
 Do not tamper with or attempt
1
2
3
to open the cylinder assembly.
4
5
6
7
8
9
 Do not subject the shock ab-
sorber assembly to an open
4
flame or other high heat source.
(b)
This may cause the unit to ex-
plode due to excessive gas
pressure.
 Do not deform or damage the
(a)
cylinder in any way. Cylinder
damage will result in poor
damping performance.
 Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
EWA10222

Luggage strap holders

1. Luggage strap holder
2. Hook
1. Luggage strap holder
There are six luggage strap holders,
four on the bottom of the passenger
seat and one on each passenger foot-
rest. To use the luggage strap holders
3-23
2
EAU38963
1
2
1
1