Replace The Monitor (Mounted On A Stand) - Cisco TelePresence MX800 Single Replacement Manual

Cisco TelePresence MX800 Single
Contents

Replace the monitor (mounted on a stand)

Step 1: Remove speaker grille, lower grille, loudspeakers and camera
Follow the steps described in "Replace the single camera module"
page 18; or "Replace the dual camera module"
Note that all loudspeakers have to be removed.
Step 2: Remove codec
Follow the steps described in "Replace the codec"
Step 3: Remove PoE injector
Follow the steps described in "Replace the PoE injector"
Spare parts:
• CTS-MX800-MON-S-S= (for single camera version)
• CTS-MX800-MON-S-D= (for dual camera version)
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction Grilles and covers
(page 1 of 5)
on page 13 to
on page 19 to page 25.
on page 27 to page 30.
on page 31 to page 32.
Speakers and cameras
4
90 kg / 200 lb
The monitor is heavy. We recommend
four people working together to replace
the monitor.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
33
Replacement Guide
Codec and monitor Codec and monitor Appendix