Cisco TelePresence MX800 Single Replacement Manual page 22

Cisco TelePresence MX800 Single
Contents
Replace the dual camera module
Step 4: Unplug camera cables
Camera assembly
2 2
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction Grilles and covers
(page 4 of 7)
board
2 2
Only remove the cables shown here
The other cables are internal to the dual camera module
and should not be disconnected.
Speakers and cameras Speakers and cameras
Left camera board
DAISY VISCA
3
CHAIN
22
Replacement Guide
Codec and monitor
Right camera board
DAISY VISCA
3
CHAIN
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Appendix