Download
Share
Print this page
  • Contents

Advertisement

Cisco TelePresence MX800 Single
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitor
Appendix
Replacement guide
for Cisco TelePresence MX800 Single
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
1

Advertisement

   Also See for Cisco TelePresence MX800 Single

Cisco MX700 Reference Manual
Cisco MX700 Reference Manual 241 pages
Cisco TelePresence MX700 Reference Manual
Cisco TelePresence MX700 Reference Manual 182 pages
Cisco TelePresence MX700 Administrator's Manual
Cisco TelePresence MX700 Administrator's Manual 141 pages

   Related Manuals for Cisco TelePresence MX800 Single

   Summary of Contents for Cisco TelePresence MX800 Single

  • Page 1

    Cisco TelePresence MX800 Single Contents Introduction Grilles and covers Speakers and cameras Codec and monitor Appendix Replacement guide for Cisco TelePresence MX800 Single D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 2: Table Of Contents

    Replace the monitor (wall mounted) ......38 go to the topic. Appendix ..............44 Part numbers for spare parts ........45 Cisco contacts ............46 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 3: Introduction

    Cisco TelePresence MX800 Single Replacement Guide Contents Introduction Introduction Grilles and covers Speakers and cameras Codec and monitor Appendix Introduction D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 4

    These documents are available at the Cisco web site. Go to http://www.cisco.com/go/mx-docs and select Maintain and Operate Guides or Install and Upgrade Guides. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 5

    The procedure applies to the floor stand option (both free standing floor stand and floor stand secured to the wall). The procedure applies to the wall mount option. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 6: Grilles And Covers

    Grilles and covers Replace the speaker grille and lower grille ....7 Replace the side covers ..........8 Replace the floor stand covers ........9 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 7: Replace The Speaker Grille And Lower Grille

    • Speaker grille for single camera version: CTS-MX800-SDC-TGR= • Lower grille for systems mounted on a stand: CTS-MX800-S-LGR= • Lower grille for wall-mounted systems: CTS-MX800-SWM-LGR= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 8: Replace The Side Covers

    Pull out gently to remove the covers. Re-assembly: The covers snap to the magnets when put back in place. Spare part: • CTS-MX800-MON-SCV= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 9: Replace The Floor Stand Covers

    First, put the left and right floor stand covers back in place. Then, mount the center floor stand cover. Spare part: • CTS-MX800-S-FSK= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 10: Speakers And Cameras

    Codec and monitor Appendix Speakers and cameras Replace a loudspeaker ..........11 Replace the single camera module ......13 Replace the dual camera module .......19 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 11: Replace A Loudspeaker

    Use gloves when handling the textile grille. The speaker grille is fastened with magnets. Pull out gently and lay it aside. Spare part: • CTS-MX700800-SPKR= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 12: Step 2: Remove Loudspeaker

    PT4x10, Torx T20 Re-assembly: In order to install the new loudspeaker, follow all the steps in reversed order. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 13: Replace The Single Camera Module

    Use gloves when handling the textile grille. The speaker grille is fastened with magnets. Pull out gently and lay aside the speaker grille. Spare part: • CTS-MXCAM-S= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 14: Step 2: Remove Loudspeaker

    Pull loudspeaker 10-15 cm (4-6 inch) out. Unplug the cable from the connector on the back of the loudspeaker. PT4x10, Torx T20 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 15

    Speakers and cameras Codec and monitor Appendix Replace the single camera module (page 3 of 6) Step 3: Unplug camera cables DAISY VISCA CHAIN D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 16

    Replace the single camera module (page 4 of 6) Step 4: Remove camera screws 4 × M4x8 (pan), Allen key, 2.5 mm D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 17: D15298.01 Mx800 Single Replacement Guide, March

    Replace the single camera module (page 5 of 6) Step 5: Remove brackets Remove 4 screws. 4 × M4x8 (pan), Allen key, 2.5 mm Remove brackets. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 18: Re-assembly

    Do not apply stress or strain to the camera module. Re-assembly: In order to install the new camera module, follow all the steps in reversed order. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 19: Replace The Dual Camera Module

    Use gloves when handling the textile grille. The speaker grille is fastened with magnets. Pull out gently and lay aside the speaker grille. Spare part: • CTS-MXCAM-D= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 20: Step 2: Remove Loudspeaker

    Pull loudspeaker 10-15 cm (4-6 inch) out. Unplug the cable from the connector on the back of the loudspeaker. PT4x10, Torx T20 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 21

    Step 3: Remove center speaker clip Remove screw. Remove speaker clip. 1 × M4x8 (pan), 1 × Speaker clip Allen key, 2.5 mm D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 22

    CHAIN Only remove the cables shown here The other cables are internal to the dual camera module and should not be disconnected. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 23

    Remove four screws. 4 × M4x8 (pan), Allen key 2.5 mm Remove two screws. 2 × M4x8 (pan), Allen key, 2.5 mm D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 24

    Replace the dual camera module (page 6 of 7) Step 6: Remove brackets Remove 4 screws. 4 × M4x8 (pan), Allen key, 2.5 mm Remove brackets. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 25: Re-assembly

    Do not apply stress or strain to the camera module. Re-assembly: In order to install the new camera module, follow all the steps in reversed order. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 26: Codec And Monitor

    Replace the codec .............27 Replace the PoE injector ..........31 Replace the monitor (mounted on a stand) ....33 Replace the monitor (wall mounted) ......38 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 27: Replace The Codec

    Step 1: Remove left side cover The side cover is fastened with magnets. Pull out gently and set aside the cover. Spare part: • CTS-MXCODEC= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 28

    For reconnecting the cables, refer to cabling details in the Cable schema and Spare part list on our web site. Go to http://www.cisco.com/go/mx-docs select Maintain and Operate Guides. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 29

    Codec and monitor Appendix Replace the codec (page 3 of 4) Step 3: Unscrew fixing screws 2 × M3x8 (countersunk), Torx T10 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 30: Re-assembly

    Pull firmly to get it out. Re-assembly: In order to install the new codec, follow all the steps in reverse order. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 31: Replace The Poe Injector

    Step 1: Remove right side cover The side cover is fastened with magnets. Pull out gently and set aside the cover. Spare part: • CTS-PWR-AIR-INJ5= D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 32: Re-assembly

    Touch 10 user Torx T10 interface (bottom). Re-assembly: In order to install the new PoE injector, follow all the steps in reverse order. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 33: Replace The Monitor (mounted On A Stand)

    “Replace the PoE injector” on page 31 to page 32. Spare parts: • CTS-MX800-MON-S-S= (for single camera version) • CTS-MX800-MON-S-D= (for dual camera version) D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 34

    Cable schema and Spare part list on our web site. Go to http://www.cisco.com/go/mx-docs select Maintain and Operate Guides. Power From PoE injector D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 35

    (page 3 of 5) Step 5: Remove monitor screws 4 × M6x12 (countersunk), Allen key, 4 mm 4 × M6x90 (countersunk), Allen key, 4 mm D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 36

    Lift up the monitor and place it in the original shipping packaging. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 37: Re-assembly

    Replace the monitor (mounted on a stand) (page 5 of 5) Re-assembly: In order to install the new monitor, follow all the steps in reversed order. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 38: Replace The Monitor (wall Mounted)

    “Replace the PoE injector” on page 31 to page 32. Spare parts: • CTS-MX800-MON-S-S= (for single camera version) • CTS-MX800-MON-S-D= (for dual camera version) D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 39

    Codec and monitor Appendix Replace the monitor (wall mounted) (page 2 of 6) Step 4: Remove lower profile Tilt out the lower profile. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 40

    Cable schema and Spare part list on our web site. Go to http://www.cisco.com/go/mx-docs select Maintain and Operate Guides. Power From PoE injector D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 41

    (page 4 of 6) Step 6: Unscrew monitor screws 4 × M6x12 (countersunk), Allen key, 4 mm 4 × M6x90 (countersunk), Allen key, 4 mm D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 42

    Lift up the monitor and place it in the original shipping packaging. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 43: Re-assembly

    Replace the monitor (wall mounted) (page 6 of 6) Re-assembly: In order to install the new monitor, follow all the steps in reversed order. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 44: Appendix

    Replacement Guide Contents Introduction Grilles and covers Speakers and cameras Codec and monitor Appendix Appendix Appendix Part numbers for spare parts ........45 D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 45: Part Numbers For Spare Parts

    Spare parts overview that is available on our web site. Go to http://www.cisco.com/go/mx-docs and select Maintain and Operate Guides. D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.

  • Page 46: Cisco Contacts

    Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third- party trademarks mentioned are the property of their respective owners.

Comments to this Manuals

Symbols: 0
Latest comments: