Replace The Poe Injector - Cisco TelePresence MX800 Single Replacement Manual

Cisco TelePresence MX800 Single Replacement Guide
Contents Introduction Grilles and covers Speakers and cameras Codec and monitor Codec and monitor Appendix

Replace the PoE injector

(page 1 of 2)
Step 1: Remove right side cover
The side cover is fastened with magnets.
Pull out gently and set aside the cover.
Spare part:
• CTS-PWR-AIR-INJ5=
D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
31