Cisco TelePresence MX800 Single Replacement Manual page 40

Cisco TelePresence MX800 Single
Contents
Replace the monitor (wall mounted)
Step 5: Remove all cables
All cables that were shipped with the system
remain in your property and should not be
returned to the supplier.
You will not receive new cables with the
replacement part.
For reconnecting the cables, refer to cabling details
in the Cable schema and Spare part list on our web
site. Go to http://www.cisco.com/go/mx-docs
select Maintain and Operate Guides.
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction Grilles and covers
(page 3 of 6)
From codec connector panel
and
Power
Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
40
Replacement Guide
Codec and monitor Codec and monitor Appendix
From codec, camera and
loudspeakers to monitor
From PoE injector