Base Led Sequences And Meaning; Base Power Communication Indicator; Reset Scanner - Honeywell Voyager 1202G-BF User Manual

Base LED Sequences and Meaning

The base contains a red LED that indicate the status of the unit and verifies its communication with the host system. The
base also has a green LED that indicates the scanner instant charge pack charge condition. The red LED and the green
LED both flash when a link is established.
Red LED
Off
On continuously
Short blinks. Occurs while transferring data to the host port.
Green LED
Off
Slow flash, 1 second on, 1 second off
Slow flash, 0.5 second on, 0.5 second off
Slow flash, 0.25 second on, 0.25 second off
On continuously

Base Power Communication Indicator

To display the power indicator on the base, scan the Base Power Communication Indicator On bar code. To turn off the
power indicator, scan the Off bar code. Default = On.
* Base Power Communication
Indicator On

Reset Scanner

Scanning this bar code reboots the scanner and causes it to relink with the base.
4 - 4
Red LED - Host Communication
Green LED - Scanner Instant Charge Pack
Reset Scanner
Condition
Power off, USB suspend
Power on, system idle
Receiving data
Condition
Instant charge pack not detected or charge
suspended
Charging instant charge pack near empty
Charging instant charge pack near medium capacity
Charging instant charge pack near full capacity
Charge complete
Base Power Communication
Indicator Off