Function Code Transmit; Communication Check Character - Honeywell Voyager 1202G-BF User Manual

DEC HEX Keyboard Function
142 8E
143 8F
144 90
145 91
146 92
147 93
148 94
149 95
150 96
151 97

Function Code Transmit

When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function
code to the terminal. Charts of these function codes are provided in
scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted. Default = Enable.
* Enable

Communication Check Character

To enhance security, you can specify the transmission type of a check character; either LRC where the calculation starts on the
first transmitted character, LRC where the calculation starts on the second transmitted character, or CRC.
Note: This option adds a check character to the bar code data for all symbologies. If you need to enable or disable check
characters for individual symbologies, see
Scan the following bar code to set the communication check character type. Default = None.
* None
LRC Starts on 2nd Character
6 - 4
Alternate Extended ASCII Characters (Continued)
Numeric Keypad Enter
Numeric Keypad /
F1
F2
F3
F4
F5
F6
F7
F8
Symbologies
DEC HEX Keyboard Function
166 A6 Tab
167 A7 Shift Tab
168 A8 Enter
169 A9 Esc
170 AA Alt Make
171 AB Alt Break
172 AC Control Make
173 AD Control Break
174 AE Alt Sequence with 1 Character
175 AF Ctrl Sequence with 1 Character
Supported Interface Keys
beginning on page 8-1.
starting on page 9-2. When the
Disable
LRC Starts on 1st Character
CRC