Honeywell Voyager 1202G-BF User Manual page 152

EAN-13 Beginning with 378/379 Addenda Required
This setting programs the scanner to require any combination of a 2 digit addenda or a 5 digit addenda on EAN-13 bar
codes that begin with a "378" or "379." The following settings can be programmed:
Require Addenda: All EAN-13 bar codes that begin with a "378" or "379" must have a 2 digit addenda, a 5 digit addenda,
or a combination of these addenda. The EAN-13 bar code with the addenda is then transmitted as a single, concatenated
bar code. If the required addenda is not found within the
Don't Require Addenda: If you have selected Require Addenda, and you want to disable this feature, scan Don't
Require Addenda. EAN-13 bar codes are transmitted, depending on the setting you are using for
Required.
Default = Don't Require Addenda.
* Don't Require Addenda
Require 5 Digit Addenda
EAN-13 Beginning with 414/419 Addenda Required
This setting programs the scanner to require any combination of a 2 digit addenda or a 5 digit addenda on EAN-13 bar
codes that begin with a "414" or "419." The following settings can be programmed:
Require Addenda: All EAN-13 bar codes that begin with a "414" or "419" must have a 2 digit addenda, a 5 digit addenda,
or a combination of these addenda. The EAN-13 bar code with the addenda is then transmitted as a single, concatenated
bar code. If the required addenda is not found within the
Don't Require Addenda: If you have selected Require Addenda, and you want to disable this feature, scan Don't
Require Addenda. EAN-13 bar codes are transmitted, depending on the setting you are using for
Required.
Default = Don't Require Addenda.
* Don't Require Addenda
8 - 36
Addenda Timeout period, the EAN-13 bar code is discarded.
Addenda Timeout period, the EAN-13 bar code is discarded.
EAN/JAN-13 Addenda
Require 2 Digit Addenda
Require 2 or 5 Digit Addenda
EAN/JAN-13 Addenda
Require 2 Digit Addenda